Home    Epidemic prevention    FFP2 Particle filtering half mask with valve YX153

FFP2 Particle filtering half mask with valve YX153

Model: YX153

Intended use: This respirator is suitable for use in protection agaist the non-toxic solid and liquid aerosols.

Shelf life: 3 years after manufacture date (on packaging).

Please read this User Information Sheet carefully before using this product.

This product complies with the requirements of EU Regulation (EU) 2016/425 for Personal Protective Equipment and meets the requirements of European standard EN149:2001+A1:2009.

The mask must be selected properly for intended application. An individual risk assessment must be evaluated. Check the mask that it is undamaged with no visible defects. Check that the expiry date has not been reached (see the packaging). Check the protection class (FFP1 NR/ FFP2 NR/ FFP3 NR) is appropriate for the product used and its concentration. Do not use the mask if a defect is present or the expiry date has been exceeded.

Easy to Use

1. Unfold the mask.

2. Position the mask under the chin covering mouth and nose.

3. Adjust the harness to make it comfortable

4. Press soft nosepiece to conform snugly around the nose.

5. To check fit, both hands over the mask and exhale vigorously. If air flows around nose, tighten the nosepiece. If air leaks around the edge, reposition the harness for better fit. Re-check the seal and repeat the procedure until the mask is sealed properly.

Usage/ Limitations

This respirator is suitable for use in protection against the non-toxic solid and liquid aerosols. Do not use out of the scope of use defined in the warnings. Failure to properly use this product may result in serious health damage or death.

FFP1 NR: Filter Efficiency 80%; Allocated Protection Factor (FPA) is 4; Examples of applications are Handling of stone / rubble / cellulose.

FFP2 NR: Filter Efficiency 94%; Allocated Protection Factor (FPA) is 10, Examples of applications are Sanding of soft wood, composite materials, rust, putty, plaster, plastics / cutting, deburring, grinding, drilling of metal.

FFP3 NR: Filter Efficiency 99%; Allocated Protection Factor (FPA) is 20; Examples of applications are Sanding of hard wood (beech, oak) / treatment of wood using copper, chrome or arsenic based products / impact stripping of paint / sanding of cement. 

      Standard applied :EN149:2001+A1:2009.

      Production capacity: the daily production capacity of foldable masks is 6 million pieces.

      Warnings

      1.  Failure to follow all instructions and limitations on the use of this product, or failure to achieve proper fit, may result in damage to your health or death.

      2.  A properly selected respirator is essential to protect your health. Before using this respirator consult a suitably qualified safety professional to determine the suitability of the product for your intended use.

      3.  This product does not supply oxygen. Use only in adequately ventilated areas containing sufficient oxygen to support life. Do not use this respirator when the oxygen concentration is less than 19.5%.

      4.  Do not use when concentrations of contaminants are immediately dangerous to health or life. Do not use this product in an explosive atmosphere.

      5.  Leave the work area immediately if: a) breathing becomes difficult or b) dizziness or other distress occurs.

      6.  Facial hair, beards and certain facial characteristics may reduce the effectiveness of this respirator.

      7.  Never alter or modify this respirator in any way (except as indicated in the instructions).

      8.  “NR” means this particle filtering half mask shall not be used for more than one shift. No maintenance is necessary. Discard respirator after use or if damaged in any way.

      9.  The length of time this respirator can be used depends on contaminants present but should not exceed one shift. The respirator should be replaced sooner if breathing becomes difficult.

      10.  Keep respirators in the display box away from direct sunlight or contaminants until use. Ambient storage conditions as temperature between -30℃ to +70℃, and relative humidity <80%.

      11.  Unless this is fitted according to the “Easy to use” instructions the respirator will not provide the expected level of protection.

      12.  This respirator is suitable for use in protection against the non-toxic solid and liquid aerosols.

      13.  Failure to achieve proper fit may result in serious health damage or death.

      14.  See information supplied by the manufacturer.

      15.  The respirators must be stored and transported in their original package and protected by the storage temperature and humidity as suggested by the manufacturer.

      Marking

 

Marking on Product

Description on label

Explanation

 

EexiInherent

Identification Mark

YX153

Product Identification

CE0598

CE mark

EN149:2001+ A1:2009

Number of European standard

FFP2 NR

Protection category

  

      Information of Manufacturer

      Manufacturer: Hunan EEXI Technology&Service Co.,Ltd.

      Address: No.6, North of Pingtou road, Liuyang Hi-tech industrial development zone, Hunan, China

      Tel: +86 0731-83371666

      Email: luke.l@hunaneexi.com

      EU- Type Examination and conformity assessment Notified Body

      Notified Body: SGS Fimko Oy

      Address: Takomotie 8, FI-00380 Helsinki, Finland Notified Body No. 0598

EN 149 standard, FFP2 particle filtering half mask certificated by SGS.

Individually packed, 20 pcs per box, 600 pcs per carton